MultiPro Compact: What parts do I need for using the 2-in-1 slicing/grating disc(s)?

You\'ll need the bowl, drive shaft, tool shaft, 2-in-1 slicing/grating disc and lid. To assemble:

1. Put the drive shaft onto the base unit and then lock the bowl in place.
2. Lower the tool shaft over the the central part of the bowl and then place your disc over the top of the tool shaft.
3. For grating, ensure the side with grating holes is facing upwards (towards the lid).
4. To slice, ensure that the side with raised grating holes faces downwards (towards the base) and the side with the raised slicing blade faces upwards.
5. Lock on the lid and turn on the unit.
6. Now add your ingredients through the feed tube, and use the pusher to guide the ingredients down the feed-tube. For the best results, use fresh ingredients and do not pre-cut food too small. Fill the width of the feed tube to prevent the food from slipping sideways during processing, this will create an even slicing/grating result.

Watch this How-To video and learn how to assemble, use and clean the reversible 2-in-1 slicing and grating disc: