Q: Do I need to cut fruits and vegetables before to use JuicePro?

No you don\'t. The JuicePro is designed to take a variety of foods as they are, with its unique dual feed tube, it can juice fruits and vegetables whole.

Question 1

How much can I juice at a time?

Accepted Answer

This will depend on the juicer you are using, but as a rule you should only juice as much as the pulp collector, or juice container will hold.The Kenwood Juicers with an internal pulp container can take up to 1kg of fruit before needing emptying.

Question 2

What are the differences between a citrus press and a centrifugal juicer?

Accepted Answer

A Citrus Juicer is a device that squeezes the juice out of a citrus fruit, the fruit must be cut in half before being juiced and most of the pulp stays on the half fruit.A Centrifugal Juicer will juice harder and whole fruits by spinning them through a fine mesh. This results in pulp build up, usually in a storage device, and also a large amount of juice.

Question 3

What kind of fruit does each type of juicer juice?

Accepted Answer

Citrus juicers, as their name suggests, juice citrus fruits. So lemons, limes, oranges and grapefruits, and all similar fruits can be used in this device.A centrifugal juicer however can juice most non-citrus fruits, as long as the fruit has juice to extract then a centrifugal juicer can usually juice it - for example apples and berries.Fruits such as Bananas cannot be juiced.

Question 4

What’s the difference between JuicePro and a standard juicer?

Accepted Answer

With a high extraction rate of up to 81%, PureJuice Pro works differently from standard juicers.By working at an optimal 48 rpm and reducing heat and oxidation, its scrolling technology gently presses fruits and vegetables to release nutrients in a way that preserves them. Slow press technology introduces less oxygen into the process of juicing retaining more nutrients.

Question 5

What’s does dual feed tube mean?​

Accepted Answer

The unique dual feed tube, can also takes fruits and vegetables whole so that your preparation will be minimal and nothing is wasted. This is healthy juicing made easy!

Question 6

Do I need to cut fruits and vegetables before to use JuicePro?​

Accepted Answer

No you don\'t. Th&#8203;e JuicePro is designed to take a variety of foods as they are, with its unique dual feed tube, it can juice fruits and vegetables whole.

Question 7

What is the JMP800 sieve made of?

Accepted Answer

The sieve material of the Slow juicer is stainless steel.

Question 8

Is the JMP800 frozen attachment BPA free?

Accepted Answer

No BPA is dectected in this product.

Question 9

Can I reverse the rotation direction if the PureJuice is clogged?

Accepted Answer

If the juicer has stopped during normal operation, probably the filter and the scroll are clogged. Press the REVERSE FUNCTION button for 3-5 seconds. Repeat the process 2-3 times until the food becomes dislodged. Once the food is released, you can start juicing again.

Question 10

How do I fit the PureJuicesorbet attachment?

Accepted Answer

If this attachment is supplied with your Slow Juicer model, fit the sorbet attachment instead of the wiper holder and the filter baskets. After that, ensure that the anti-drip stopper is in the open position before processing.

Question 11

How do I clean my PureJuice extractor?

Accepted Answer

Filters: switch the juicer on and pour approximately 300mls water down the feed tube. Operate the juicer for approximately 20 seconds, place the juice jug under the juice spout and open the stopper to allow the water to flow out. Always clean the filter basket immediately after juicing. You can use the brush supplied to clean the filter. For best results, rinse under water and brush until clear.Wiper holder: remove it and wash under running tap water.Power unit: wipe with a damp cloth and dry.Other parts: we recommend to wash by hand and dry with a damp clothes

Question 12

What does Scrolling technology mean?

Accepted Answer

The scrolling technology gently presses fruits and vegetables to release nutrients in a way that preserves them. With a high extraction rate of up to 81%, PureJuice works differently from standard juicers.

Question 13

My PureJuice XL stopped during normal operation. What can I do?

Accepted Answer

If your PureJuice XL stops whilst in use, it may be because one of the following has occurred: 1- The food inserted inside the feed tube, filter or at the top of the scroll has clogged. This may occur if the food has not been cut into enough small pieces. Please press the reverse button for 3-5 seconds. Repeat the process 2-3 times until the blockage has cleared. DO NOT attempt to open the lid by force. Switch off the machine, unplug and remove the lid, and check if any clogging is visible and if necessary remove the food. Now you can continuing juicing. 2- The juicer is overloaded or overheated due to heavy loads. If this is the case, switch your machine off, unplug and take the juicer apart. Clear and reassemble the juicer. Plug in and press the \'Reset\' button, hold for 1-2 seconds and start operation as normal. as normal.

Question 14

Juice is leaking from underneath the bowl on my PureJuice XL.

Accepted Answer

If you see some leakage from underneath the bowl, it is possible that the pulp stopper is not fitted properly or it has come loose during operation. Please adjust the pulp outlet if necessary.

Question 15

Juice does not exit the juicing outlet on my PureJuice XL.

Accepted Answer

If no juice is coming out from the juicing outlet, it may be because the anti-drip stopper is closed. Please remove the stopper in order to allow the juice to flow into the juice container.

Question 16

There is too much pulp coming out in the juice on my PureJuice XL.

Accepted Answer

If your juice has too much pulp in it, it may be that the filter or scroll is clogged. Some fruits and vegetables are more fibrous than others and they may wrap easily around the scroll. Try to cut the food you want to process into smaller pieces, especially the fibrous ones.

Question 17

There is some staining on PureJuice XL juicing parts. How can I wash them?

Accepted Answer

If you start to notice some staining on your juicing parts, it is due to the natural colouring from food. Please try to rub each part with a cloth dipped in vegetable oil. This procedure will help to remove discolouration.

Question 18

I hear a squeaking noise when juicing on my PureJuice. What can I do?

Accepted Answer

If you hear a squeaking noise when juicing, it is completely normal. The sound is made from the friction between ingredients and bowl.

Question 19

What’s the PureJuice Wattage and rpm?

Accepted Answer

Pure Juice Pro JMP600SI: 150W, 60 rpmPure Juice JMP800SI: 150W, 48 rpmPure Juice JMP600WH: 150W, 60 rpmPure Juice JMP601WH: 150W, 60 rpm

Question 20

How to use my PureJuice XL

Accepted Answer

Cut down on prep time by feeding whole pieces directly in the XL feed tube, extract maximum juice and nutrients and collect the dry pulp for sweet and savoury recipes. Get creative with your favourite flavours and follow these hints and tips for a great experience with your new PureJuiceXL. • Use fresh fruit and vegetables as they contain more juice. • Wash all fruit and vegetable thoroughly before juicing. • To extract the maximum amount of juice, always push the food down slowly using the pusher. Do not use excessive force as the food should be pulled down by the scroll. • Hard foods are best juiced at room temperature. • You do not have to remove thin peels or skins. Only remove thick peels that you would not eat e.g. those of oranges, pineapples, melons and beetroot. • Remove stones and hard seeds from cherries, nectarines, peaches, mangoes, plums etc. • If you need to store the juice for a few hours put it in the fridge. It will keep better if you add a few drops of lemon juice.

Spin Juicer