 |
E : 01
If the speed control is turned to any setting other than the Off ‘0’ position when the head is raised the motor will not switch on.
 Solution
 Close the head.
Turn the speed control to ‘0’ and then select the desired speed. |
 |
E : 02
The Cooking Chef bowl is not fitting correctly and therefore will not work.
 Solution
- Check the bowl is fitted correctly.
- The logo should always face the front of the machine.
|
 |
E : 03
The heat shield is not fitted correctly and the heating function will not work.
 Solution
Ensure the heat shield is fitted correctly.
It should push firmly up under the head of the machine. |
 |
E : 04
If any of the slow/medium or high speed outlet covers are not fitted correctly the heating function will switch off but the motor will still run continuously.
Solution
Ensure that all the covers are fitted correctly.
Turn the speed control to ‘0’ and then select desired speed.
|
 |
E : 09
Temperature sensor problem.
Solution
Turn the speed to ‘0’, unplug the machine and allow to cool.
Check the bowl base and temperature sensors are clean. Plug in and switch on. |
 |
E : 10
Motor speed or overheat problem. If the motor stalls or gets too hot, the control system will automatically switch off the motor and heater.
Solution
Turn the speed to ‘0’ and unplug the machine.
Remove any obstructions causing the motor to stall. Ensure all air vents are clear.
Plug in and switch on. |